61 31 054 Removing and installing/replacing centre console switch cluster (with CCC/ASK)

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Unclip trim (3) at fastening points (1) and (2).

Feed out associated ribbon cable and remove trim (3) complete with centre console switch cluster (4).

Fig 1: Identifying Trim, Fastening Points And Console Switch Cluster

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Unclip centre console switch cluster (1) at fastening points (2) and (4) and remove.

NOTE: Ribbon cable (3) of centre console switch cluster (1) leads to heater/air conditioner operator unit.

Installation:

Make sure centre console switch cluster (1) engages correctly in upper fastening points (4) and lower fastening points (2).

Fig 2: Identifying Console Switch Cluster, Fastening Points And Ribbon Cable

Courtesy of BMW OF NORTH AMERICA, INC.