65 11 070 Removing and installing/replacing CD changer
WARNING: This page is about a different variant/trim than selected.
IMPORTANT:
Read and comply with Notes On Protection Against Electrostatic Damage (ESD Protection)
.
Necessary preliminary tasks:
- Disconnect Battery Negative Lead
- Remove Luggage Compartment Trim on left.
- If necessary, Remove Video Module For On-Board Monitor
NOTE:
Follow instructions for Handling Optical Fibres
.
Release screws (1).
Pull CD changer (2) forward and unlock and disconnect plug connections.
Remove CD changer (2) complete with holder.
Replacement:
Release screws (1) and remove holder (3) from CD changer (2).