Bus System Troubleshooting - Overview - E36, E38, E39, E46, E52 & E53
- Bus System Troubleshooting
- Notes
- Introduction
- Definitions
- Controller Area Network (CAN Bus)
- Introduction
- CAN Bus Topology
- Troubleshooting The CAN Bus
- Notes
- Failure Of The CAN Bus Cables
- Example Of Correctly Operating CAN Bus
- Examples Of Defective CAN Bus Signals
- Rapid Constant Fixed Duty Cycle For 10 Seconds
- Constant Fixed Duty No Time Limit
- Flat Line At 2.5 Volts
- CAN High Shorted To CAN Low
- Failure Of One Of The Control Units Attached To The Can
- Failure Of The Voltage Supply To Individual Modules
- Interference In The CAN Bus Cables
- Programming
- Diagnosis Bus (D-Bus)
- Information and Body Bus (I and K bus)
- Introduction
- I/K Bus Topology
- Troubleshooting The I/K Bus
- Notes
- On E38 And E39/E53 High Version Vehicles:
- On E46, E52 And E39/E53 Base Version Vehicles:
- Failure Of The Bus Cable
- Example Of Correctly Operating I/K Bus During Communication
- Flat Line At 12 Volts
- Flat line at 5 volts
- Failure Of One Of The Control Units Attached To The I/K Bus.
- Failure Of The Voltage Supply To Individual Modules.
- Interference In The Bus Cables.
- Peripheral Bus (P-Bus)
- Motor Bus (M-Bus)
- Review Questions