LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2001 >> M5 >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Bus System Troubleshooting - Overview - E36, E38, E39, E46, E52 & E53 >> Bus System Troubleshooting >> Controller Area Network (CAN Bus) >> Troubleshooting The CAN Bus >> Rapid Constant Fixed Duty Cycle For 10 Seconds

Rapid Constant Fixed Duty Cycle For 10 Seconds

This example represents the output signal produced by an AGS module that is isolated from the bus. This pattern times out after 10 seconds and remains a flat line at 2.5 volts until the key is cycled and the event is repeated.

Fig 1: Identifying Defective CAN Bus Signal Rapid Constant Fixed Duty Cycle For 10 Seconds
G03396324