Bumper Cover, Removing And Installing, RS6, RS7 SPORTBACK: Notes
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- To complete the procedure, a second technician is required to be at the following position. Refer to Removing => Disengage the side bolster -2- from the front side panel in direction of -arrow A-. .
- Depending on the equipment version, the following additional work must be performed. Refer to Depending on the version, the following additional work is required: .
Special tools and workshop equipment required
- Engine Bung Set :VAS 6122