Bumper Cover, Removing And Installing, RS6, RS7 SPORTBACK: Installing
WARNING: This page is about a different car, the 2024 Audi S6 and 2024 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Adjust the bumper cover. Refer to BUMPER COVER, ADJUSTING .
Depending On The Version, The Following Additional Work Is Required:
-- Adjust the adaptive cruise control (ACC). Refer to ADAPTIVE CRUISE CONTROL (ACC), ADJUSTING .
- Note the conditions here for a required adjustment of the adaptive cruise control (ACC).
-- Calibrate the Front Peripheral Camera -R243-. Refer to PERIPHERAL CAMERA, CALIBRATING .
- Note the conditions here for a required calibration of the Front Peripheral Camera -R243-.
-- Calibrate the night vision system camera. Refer to INFRARED SYSTEM, CALIBRATING .
- Note the conditions here for a required calibration of the night vision system camera.
-- Calibrate the front corner radar. Refer to FRONT CORNER RADAR, CALIBRATING .
- Note the conditions here for a required calibration of the front corner radar.
Tightening Specifications