Safety Precautions And Test Procedures, All-Wheel Drive Clutch 0CJ Or 0CX

All-Wheel Drive Clutch

Courtesy of AUDI OF AMERICA, LLC

• The all-wheel drive clutch has its own fluid system.
• Check the ATF level and fill (if necessary) when replacing or after repairing the all-wheel drive clutch. Refer to OIL LEVEL, CHECKING .
• Capacities (Refer to ALL-WHEEL DRIVE CLUTCH CAPACITY, 0CX AND 0DJ ) and specifications. Refer to the Parts Information.
• Clutch Torque, Checking. Refer to ALL-WHEEL DRIVE CLUTCH TORQUE, CHECKING .

ATF for All-Wheel Drive Clutch, Replacing

• If the ATF is being replaced, the >>oil age adaptation values<< under Guided Functions  in the 22 - AWD electronics  folder and the function 22 - Perform ATF change for all-wheel drive clutch  must be reset to a new ATF. Refer to ALL-WHEEL DRIVE CLUTCH OIL, DRAINING AND FILLING .

All-Wheel Drive Clutch, Replacing

• All-Wheel Drive Clutch, Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .
• If the all-wheel drive clutch is being replaced, it must be activated under Guided Functions  in the 22 - AWD electronics  folder with the function 22 - Replace control module  . Refer to ADDITIONAL WORK WHEN REPLACING ALL-WHEEL DRIVE CLUTCH .

All-Wheel Drive Control Module -J492-, Replacing

• All-Wheel Drive Control Module, Removing and Installing. Refer to CONTROL MODULE, REMOVING AND INSTALLING .
• If the All-Wheel Drive Control Module -J492- is being replaced, additional work is required (reading out the adaptation values of the old control module). Refer to ADDITIONAL WORK FOR VEHICLES WITH "quattro ultra" .