COMPONENT LOCATION OVERVIEW - SEALS ON ALL-WHEEL DRIVE CLUTCH "quattro ultra"

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Final Drive Seals On All-Wheel Drive Clutch "Quattro Ultra"

Courtesy of AUDI OF AMERICA, LLC

O-Ring
- For all-wheel drive clutch input shaft
- Replace if damaged
Seal for All-Wheel Drive Clutch Input Shaft
- Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH INPUT SHAFT SEAL, REPLACING .
All-Wheel Drive Clutch
- Refer to OVERVIEW - ALL-WHEEL DRIVE CLUTCH
- Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .
- Additional work is necessary when replacing the all-wheel drive clutch. Refer to ADDITIONAL WORK WHEN REPLACING ALL-WHEEL DRIVE CLUTCH .
Bleeder
Dust Ring
- For the all-wheel drive clutch output shaft
- Replace after removing
- Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH OUTPUT SHAFT SEAL, REPLACING .
All-Wheel Drive Clutch Output Shaft Seal
- Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH OUTPUT SHAFT SEAL, REPLACING .
Actuator Shaft Seal
O-Ring
- for All-Wheel Drive Control Module --
- Replace
O-Ring
- for All-Wheel Drive Control Module --
- Replace
All-Wheel Drive Control Module -J492-
Integrated in the All-Wheel Drive Control Module -- :
- All-Wheel Drive Clutch Actuator -V622-
- All-Wheel Drive Clutch Position Sensor -G969-
- Additional work when replacing the control module is necessary. Refer to ADDITIONAL WORK FOR VEHICLES WITH "quattro ultra" .
- Removing and Installing. Refer to CONTROL MODULE, REMOVING AND INSTALLING .