Additional Work When Replacing All-Wheel Drive Clutch
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- These procedures are only done when the all-wheel drive clutch is being replaced.
Special tools and workshop equipment required
-- Connect the Vehicle Diagnostic Tester and switch on the ignition.
-- On the Vehicle Diagnostic Tester, select the function 22 - Replace control module under Guided Functions in the directory 22 - AWD electronics .
-- Start the selected program and follow the instructions in the display of the Vehicle Diagnostic Tester.
- Follow all the instructions given by the Vehicle Diagnostic Tester exactly.