Overview - All-Wheel Drive Clutch
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2022 Audi SQ7, 2022 Audi Q7, 2021 Audi SQ7, 2021 Audi Q7, and 2020 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- All-Wheel Drive Clutch
- Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .
- Additional work is necessary when replacing the all-wheel drive clutch. Refer to ADDITIONAL WORK WHEN REPLACING ALL-WHEEL DRIVE CLUTCH .
- Refer to COMPONENT LOCATION OVERVIEW - SEALS ON ALL-WHEEL DRIVE CLUTCH "quattro ultra"
- Bleeder
- Bolt
- 8 Nm +180°
- Replace
- M8 X 70
- Quantity: 3
- Balance Weight
- Installed depending on the version
- Bolt
- 28 Nm
- Installed depending on the version
- Bolt
- 28 Nm
- Installed depending on the version
- Heat Shield
- For driveshaft
- Installed depending on the version
- Heat Shield
- for All-Wheel Drive Control Module --
- Installed depending on the version
- Bolt
- 8 Nm
- Installed depending on the version
- Bolt
- 8 Nm +180°
- Replace
- M8 X 100
- O-Ring
- for All-Wheel Drive Control Module --
- Replace
- O-Ring
- for All-Wheel Drive Control Module --
- Replace
- All-Wheel Drive Control Module -J492-
Integrated in the All-Wheel Drive Control Module -- :
- All-Wheel Drive Clutch Actuator -V622-
- All-Wheel Drive Clutch Position Sensor -G969-
- Additional work when replacing the control module is necessary. Refer to ADDITIONAL WORK FOR VEHICLES WITH "quattro ultra" .
- Removing and Installing. Refer to CONTROL MODULE, REMOVING AND INSTALLING .
- Bolt
- 21 Nm