LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Seat Frame, Disassembling And Assembling >> Seat Side Trim, Removing And Installing, Center Second Row Seat >> Installing

Seat Side Trim, Removing And Installing, Center Second Row Seat: Installing

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Tunnel-side seat side trim: Guide the pull loops -2 and 3- for the backrest release through the slot on the seat side trim.

-- Align the seat side trim in the mounts before inserting the clips.

Installation instructions: for example, tightening specifications, replacing body parts. Refer to OVERVIEW - BENCH SEAT/SINGLE SEATS, SEAT LOW TRIM PANELS, CENTER SECOND ROW  and OVERVIEW - BENCH SEAT/SINGLE SEATS, SEAT HIGH TRIM PANELS, CENTER SECOND ROW .

scientia non olet · About LEMON Manuals