Crankcase Ventilation Module, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Check the O-ring for damage. Refer to OVERVIEW - CRANKCASE VENTILATION .
Replace the seal after removal.

-- Install the heat shield and engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .