LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Lubrication (1 Of 2)) >> 17 Lubrication >> Crankcase Ventilation >> Overview - Crankcase Ventilation

Overview - Crankcase Ventilation

WARNING: This page is about a different car, the 2022 Audi Q8, 2021 Audi Q8, 2020 Audi Q8, and 2019 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Crankcase Ventilation
GWWA17-10852Courtesy of AUDI OF AMERICA, LLC
  1. Camshaft Housing
  2. Hose/Plug
    • Depending on the version
  3. O-Ring
  4. Seal
    • Always replace after removing.
  5. Crankcase Ventilation Module
  6. Grommet
  7. Seal
    • Always replace if damaged
  8. Cap
  9. Bolt
    • Tightening Specifications and Sequence. Refer to Fig 2.
  10. O-Ring
  11. Hose
    • For the crankcase ventilation
    • The crankcase ventilation hose cannot be removed from the air duct pipe without damage. Refer to OVERVIEW - CHARGE AIR SYSTEM .

Crankcase Ventilation Module - Tightening Specifications and Sequence 

Fig 2: Crankcase Ventilation Module - Tightening Sequence
GWWA17-11053Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the sequence shown to 9 Nm.