Overview - Cover And Cushion

Fig 1: Exploded View Of Cover And Cushion

Cushion
- 1/3 rear bench seat
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, REAR BENCH SEAT .
- Versions with seat heating: attach a new heating element when replacing. Refer to SEAT HEATING ELEMENT, REMOVING AND INSTALLING .
Upholstery Clip
- For securing the cover to the cushion
- Replace after removing.
Molding
- Sewn into cover
- To engage the cover on the cushion wire frame
- Check for proper seating
Cover
- 1/3 rear bench seat
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, REAR BENCH SEAT .
Cushion
- 3/3 rear bench seat
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, REAR BENCH SEAT .
Molding
- Sewn into cover
- To engage the cover on the cushion wire frame
- Check for proper seating
Cover
- 3/3 rear bench seat
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, REAR BENCH SEAT .
Cover
- Rear Seat Backrest
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR SEAT BACKREST .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, REAR SEAT BACKREST .
Cushion
- Rear Seat Backrest
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR SEAT BACKREST .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING, REAR SEAT BACKREST .
- Versions with seat heating: attach a new heating element when replacing. Refer to BACKREST HEATING ELEMENT, REMOVING AND INSTALLING .
Center Cushion
- With cover
- Removing and Installing. Refer to CENTER CUSHION, REMOVING AND INSTALLING, BACKREST WITH PASS-THROUGH .
Backrest
- With pass-through
- Overview. Refer to OVERVIEW - BACKREST WITH PASS-THROUGH .
Foam Filler Piece
- Removing and Installing. Refer to PASS-THROUGH COVER FRAME, REMOVING AND INSTALLING .
Cover
- For the upper section of backrest
- Removing and Installing. Refer to PASS-THROUGH COVER FRAME, REMOVING AND INSTALLING .
Screw
- 11 Nm
Side Cushion
- Removing and Installing. Refer to SIDE CUSHION, REMOVING AND INSTALLING .
Clip
- Replace after removing the side cushion
Screw
- 11 Nm
Pop Rivet Nut
Bracket
- For side cushion
- Removing and Installing. Refer to SIDE CUSHION BRACKET, REMOVING AND INSTALLING .
Molding
- Sewn into cover
- To engage the cover on the cushion wire frame
- Check for proper seating
Cover
- 2/3 rear bench seat
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING .
Cushion
- 2/3 rear bench seat
- Covers and Cushions, Removing and Installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
- Cover and Cushion, Separating. Refer to COVER AND CUSHION, SEPARATING .
- Versions with seat heating: attach a new heating element when replacing. Refer to SEAT HEATING ELEMENT, REMOVING AND INSTALLING .