Bumper Cover, Removing And Installing: Removing
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
-- Loosen the front wheel cover in the area of the bumper side section. Refer to FRONT WHEEL COVER, REMOVING AND INSTALLING .
-- Push in the front wheels and loosen the left and right wheel housing liner near the front bumper cover. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Remove the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the left and right bolts -2 and 3- from the bumper cover -1-.
-- Release and disconnect the connectors -5-.
-- Place a drip tray under the left hose coupling for the washer fluid hose.
-- Release the clamp -6- and the washer fluid hose -4-.
-- Seal the hose couplings with clean plugs from the : VAS6122 .
-- Remove the bolts -2- from the bumper cover -1-.
-- Release and disconnect the connector -3-.
-- Free up the wiring harness -2- -arrows-.
-- Remove the bolts -1-.
-- Disconnect the hose couplings -4-.
-- Seal the open hose couplings with clean plugs from the : VAS6122 .
-- Disengage the side piece from the front side panel -arrow A- and remove the bumper cover -1- with the help of a second technician -B arrows-.