Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
- Refer to DRIVE AXLE, INNER CV JOINT 100 MM (3.93 IN.) DIAMETER - BOLTED
- Refer to DRIVE AXLE, INNER CV JOINT 108 MM DIAMETER - BOLTED
- Refer to DRIVE AXLE WITH TRIPLE ROLLER JOINT AAR 2600I, BOLTED
- Refer to DRIVE AXLE THREADED CONNECTION, LOOSENING AND TIGHTENING
- Refer to OVERVIEW - FRONT LEVEL CONTROL SYSTEM SENSOR
- Refer to OVERVIEW - SUBFRAME
- Refer to OVERVIEW - SUSPENSION STRUT AND UPPER CONTROL ARM
- Refer to OVERVIEW - LOWER CONTROL ARM AND BALL JOINT
- Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING
- Refer to OVERVIEW - NOISE INSULATION .
- Refer to WHEELS AND TIRES