Overview - Release Cable

Fig 1: Exploded View Of Release Cable

Courtesy of AUDI OF AMERICA, LLC

Right Hood Latch
- Removing and Installing. Refer to OVERVIEW - HOOD, HOOD LATCH .
Hood Latch Cable
- Removing:
  -- Disconnect the release cable at the coupling RELEASE CABLE, REMOVING AND INSTALLING .
  
  -- Pull the release cable through to the engine compartment.
- Installing: install in reverse order of removal
- Adjust the hood latch point of release RELEASE CABLE, REMOVING AND INSTALLING .
Left Hood Latch
Release Lever
- Disengage the release cable, refer to OPERATING LEVER, REMOVING AND INSTALLING .
Cable Coupling
-- Disengage the release cable inside the passenger compartment before removing the lock carrier and when removing the operating lever.
Hood Release Lever Cable
- Release cable to the operating lever in the vehicle interior.
Grommet
- Make sure it fits correctly when installing it. The grommet must be pushed all the way into the bulkhead.