LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seat Frames) >> 72 Seat Frames >> Front Seat Pneumatic System >> Overview - Pneumatic System >> Overview - Pneumatic System, H O RBIGER MULTICONTOUR Seat

Overview - Pneumatic System, H O RBIGER MULTICONTOUR Seat

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

For repair instructions and test methods for pneumatic components, refer to PNEUMATIC SYSTEM, CHECKING .

Fig 1: Pneumatic System, H O Rbiger Multicontour Seat
GWWA72-11233Courtesy of AUDI OF AMERICA, LLC
  1. Seat Bolster Inflation Adjustment
  2. Driver Multicontour Seat Compressor -V439-
  3. Backrest Bolster Inflation Adjuster
  4. Check Valve
    • Depending on the version, separate component or integrated in the multi-contour seat control module
    • Remove the external check valve if installing a multicontour seat control module that contains a check valve. .
  5. Massage Mat
  6. Driver Multicontour Seat Control Module -J873-
  7. Valve Block 1 in Driver Seat -N475-
  8. Pulsation Damper
  9. Module Carrier with Air Cushions for Lumbar Support
  10. Valve Block 2 in Driver Seat -N476-
scientia non olet · About LEMON Manuals