Overview - Pneumatic System, H O RBIGER MULTICONTOUR Seat Compressor

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Pneumatic System, H O Rbiger Multicontour Seat Compressor

Courtesy of AUDI OF AMERICA, LLC

Nut
- 3.5 Nm
- Quantity: 3
- Brace rubber-metal mount while tightening
Spring Washer
- Quantity: 3
Washer
- Quantity: 3
Bonded Rubber Bushing
- Quantity: 3
- Removing and installing. Refer to MULTICONTOUR SEAT COMPRESSOR BONDED RUBBER BUSHING, REMOVING AND INSTALLING, KONGSBERG MULTICONTOUR SEAT .
- Do not install under tension or twisted
Bracket
- For front trim, compressor and multicontour seat control module
- Removing and installing. Refer to FRONT SEAT TRIM BRACKET/COMPRESSOR/CONTROL MODULE, REMOVING AND INSTALLING, MULTICONTOUR SEAT .
Rivet
- Quantity: 3
Front Seat
Pneumatic Line
Driver Multicontour Seat Compressor -V439-
- Front passenger side: Front Passenger Multicontour Seat Compressor -V440-
- Removing and installing. Refer to COMPRESSOR/MULTICONTOUR SEAT CONTROL MODULE, REMOVING AND INSTALLING .