Overview - Bevel Box
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification, refer to -item 3 OVERVIEW - DIFFERENTIAL - Bolt
- Heat Shield
- For drive axle
- Bolt
- Tightening specification. Refer to DRIVE AXLE .
- Bolt
- Tightening specification. Refer to appropriate service information .
- Heat Shield
- For driveshaft
- Bolt
- Tightening specification. Refer to appropriate service information .
- Bevel Box
- Removing. Refer to BEVEL BOX, REMOVING .
- Installing. Refer to BEVEL BOX, INSTALLING .
- Bolt
- Tightening specification. Refer to BEVEL BOX, TIGHTENING SPECIFICATION .
- Always replace after removing
- Bracket
- For bevel box
- There are different versions. Refer to the Parts information for the correct allocation.
- Bolt
- Tightening specification and sequence. Refer to BEVEL BOX, TIGHTENING SPECIFICATION .
- Bolt
- Tightening specification and sequence. Refer to BEVEL BOX, TIGHTENING SPECIFICATION .