Headlamp Housing Mount Bracket, Removing And Installing: Installing

Fig 1: Headlamp Housing Mount Bracket

Courtesy of AUDI OF AMERICA, LLC

• Tightening Specification. Refer to OVERVIEW - HEADLAMP HOUSING MOUNT,  and OVERVIEW - HEADLAMP HOUSING MOUNT, .

Install In Reverse Order Of Removal. Note The Following: 

-- Install The Bracket To The Fender And To The Lock Carrier And Bolts -1, 2, 3- By Hand.

-- Install The Headlamp Washer System Spray Nozzle. Refer To SPRAY NOZZLES, REMOVING AND INSTALLING, ALL AUDI A5 MODELS, AUDI RS 5 . Audi RS 5 From MY 2012, USA From MY 2013. Refer to SPRAY NOZZLES, REMOVING AND INSTALLING, AUDI RS 5, .

-- Install The Front Bumper Cover. Refer To FRONT - BUMPER COVER, REMOVING AND INSTALLING .

-- Align The Bumper Cover Gaps According To The Body Contours.

• Gap Dimension = Even Gap Variation.

-- Tighten The Bolts.

-- Inspect The Gaps Again And Repeat The Adjustment If Necessary.

-- Install The Headlamp Housing:

• Halogen Headlamps: Vehicles Through 10/2008  (Refer to HEADLAMP, REMOVING AND INSTALLING, HALOGEN HEADLAMPS, Through MY 2012 ), Vehicles From 11/2008  (Refer to HEADLAMP, REMOVING AND INSTALLING, HALOGEN HEADLAMPS, FROM 11/2008 ), Vehicles From MY 2012  , USA From MY 2013  (Refer to HEADLAMP, REMOVING AND INSTALLING, HALOGEN HEADLAMP, ).
• HID headlamps: Vehicles Through MY 2011:  Refer to HEADLAMP, REMOVING AND INSTALLING, HID HEADLAMPS WITH CORNERING LAMP, Through MY 2011 ; USA Vehicles Through MY 2012:  Refer to HEADLAMP, REMOVING AND INSTALLING, HID HEADLAMP WITH CORNERING LAMP, ; Vehicles From MY 2012  , USA From MY 2013:  Refer to HEADLAMP, REMOVING AND INSTALLING, HID HEADLAMP, .

-- Adjust The Headlamp. Refer To HEADLAMP, ADJUSTING .