OVERVIEW - HEADLAMP HOUSING MOUNT, From MY 2013
WARNING: This page is about a different variant/trim than selected.
- Screw
- 8 Nm
- Bracket
- For the headlamp housing mount
- Removing and installing. Refer to HEADLAMP HOUSING MOUNT BRACKET, REMOVING AND INSTALLING .
- Adjusting Nut
- For adjusting the front bumper cover to the body
- Screw
- 8 Nm
- Screw
- 8 Nm
- Screw
- 1 Nm
- Mount
- For ventilation hose
- There are different versions.
- For attaching to the headlamp housing mount
- Screw
- 1 Nm
- Mount
- For ventilation hose
- There are different versions.
- For attaching to the headlamp housing
- Breather Hose
- For the headlamp housing
- Screw
- 4.5 Nm
- Quantity: 2
- Upper Mount
- For the headlamp housing
- Removing and installing. Refer to UPPER HEADLAMP HOUSING MOUNT, REMOVING AND INSTALLING, .
- Screw
- 4.5 Nm
- Quantity: 2
- Spring Nut
- Quantity: 2
- Mount
- For the headlamp housing
- There are different versions.
- Removing and installing. Refer to HEADLAMP HOUSING MOUNT, REMOVING AND INSTALLING .
- Screw
- 4.5 Nm
- Quantity: 2