Overview - Seat Bench/Single Seat, One Piece Bench Seat

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Bench Seat Overview

Courtesy of AUDI OF AMERICA, LLC

Bench Seat
NOTE:
The Wire Frame Of The Bench Seat Must Be Checked After Every Disassembly Of The Bench Seat And Be Readjusted In The Case Of Deformation.
- One piece
- Removing and installing. Refer To SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .
- Check and readjust the wire frame. Refer To FLOOR PANEL FOR BENCH SEAT MOUNTING GROMMETS AND WIRE FRAME, CHECKING AND ALIGNING
Cover
- For LATCH
- Equipment levels
- Quantity: 4
- Clipped to the LATCH child seat anchorage brackets that are welded to the floor
Mounting Grommet
NOTE:
Replace the mounting grommets each time the bench seat is removed.
- Quantity: 2
- For securing bench seat
- Clipped into the vehicle floor
- Removing and installing. Refer To REMOVE MOUNTING GROMMETS -2- FROM THE BODY OPENING AND THROW AWAY. or SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .
Vehicle Floor
NOTE:
The floor panel into which the mounting grommets are inserted must be checked after every disassembly of the bench seat and be readjusted in the case of deformation.
- Check and readjust the floor panel. Refer To FLOOR PANEL FOR BENCH SEAT MOUNTING GROMMETS AND WIRE FRAME, CHECKING AND ALIGNING