Fuel Injection System, Component Location Overview, Vehicles With Engine Code CGQB: Notes
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Engine Compartment
- Mass Airflow Sensor -G70-
- Removing and installing, refer to Mass Airflow Sensor -G70-, REMOVING AND INSTALLING .
- Camshaft Position Sensor -G40-
- Component location
- Overview, refer to OVERVIEW - GLOW PLUG, CAMSHAFT POSITION SENSOR AND ENGINE SPEED SENSOR .
- EGR Temperature Sensor - G98- connector
- Component location, refer to
- Removing and installing, refer to appropriate service information. .
- Connector
- for the Map Controlled Engine Cooling Thermostat - F265-, Fuel Metering Valve -N290- and Map Controlled Engine Cooling Thermostat -V338-
- Component location appropriate service information.
- Restrictor
- in the fuel return line
- Component location. Refer to appropriate service information.
- Differential Pressure Sensor -G505-
- for the Exhaust Gas Temperature Sensor 3 - G495- connector
- Component location appropriate service information.
- Fuel Temperature Sensor -G81-
- Structure Borne Sound Control Module -J869-
- Turbocharger Control Module 1 -J724-
- Exhaust Gas Temperature Sensor 1 -G235-
- Charge Air Pressure Sensor 2 -G447-
- Component location. Refer appropriate service information.
- Removing and installing, refer to Turbocharger Control Module 1 -J724-, REMOVING AND INSTALLING [For engine(s) CPNB] .
- EGR Motor -V338-
- Removing and installing, refer to appropriate service information. .
- Control Valve Position Sensor -G584-
- Component location. Refer to appropriate service information.
- Heated Oxygen Sensor -G39- with Oxygen Sensor Heater -Z19-
- Component location. Refer to appropriate service information.
- Overview, refer to OVERVIEW - HEATED OXYGEN SENSORS AND EXHAUST GAS TEMPERATURE SENSORS .
- Fuel Pressure Sensor -G247-
- Removing and installing, refer to Fuel Pressure Sensor -G247-, REMOVING AND INSTALLING .
- Tightening specification, refer to appropriate service information.
- Heated Oxygen Sensor -G39- connector
- Engine Control Module -J623-
- Component location
- Removing and installing, refer to Engine Control Module -J623-, REMOVING AND INSTALLING .
- Charge Air Pressure Sensor -G31- / Intake Air Temperature Sensor -G42-
- Component location. Refer to appropriate service information.
- Throttle Valve Control Module -J338-
- Overview, refer to OVERVIEW - INTAKE MANIFOLD .
- Injector
- Cylinder bank 2
- Removing and installing, refer to FUEL INJECTORS, REMOVING AND INSTALLING .
- Turbine Switch-Over Valve -N529-
- For checking, refer to appropriate service information. .
- Engine Temperature Control Sensor -G694-
- Component location, Refer to Engine Temperature Control Sensor -G694-:
- EGR Temperature Sensor -G98-
- Removing and installing, refer to appropriate service information .
- Intake Flap Motor -V157-
- Overview, refer to OVERVIEW - INTAKE MANIFOLD .
- EGR Cooler Switch-Over Valve -N345-
- Map Controlled Engine Cooling Thermostat -F265-
- Component location
- Removing and installing, refer to Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING .
- Cylinder Head Coolant Valve -N489-
- Wastegate Bypass Regulator Valve -N75-
- Reduced Oil Pressure Switch -F378-
- Removing and installing, refer to Oil Pressure Switch -F22- / Reduced Oil Pressure Switch -F378-, REMOVING AND INSTALLING .
- Fuel Pressure Regulator Valve -N276-
- Overview, refer to OVERVIEW - HIGH PRESSURE PUMP .
- Injector
- Cylinder bank 1
- Removing and installing, refer to FUEL INJECTORS, REMOVING AND INSTALLING .
Engine Top
- Fuel Pressure Regulator Valve -N276-
- Overview, refer to OVERVIEW - HIGH PRESSURE PUMP .
- Cylinder 1 Fuel Injector -N30-
- Overview, refer to OVERVIEW - HIGH PRESSURE PUMP .
- Glow Plug 1 -Q10-
- Overview, refer to OVERVIEW - GLOW PLUG, CAMSHAFT POSITION SENSOR AND ENGINE SPEED SENSOR .
- Cylinder 2 Fuel Injector -N31-
- Overview, refer to OVERVIEW - HIGH PRESSURE PUMP .
- Camshaft Position Sensor -G40-
- Component location
- Overview, refer to OVERVIEW - GLOW PLUG, CAMSHAFT POSITION SENSOR AND ENGINE SPEED SENSOR .
- Glow Plug 2 -Q11-
- Overview, refer to OVERVIEW - GLOW PLUG, CAMSHAFT POSITION SENSOR AND ENGINE SPEED SENSOR .
- Cylinder 3 Fuel Injector -N32-
- Overview, refer to OVERVIEW - HIGH PRESSURE PUMP .
- Glow Plug 3 -Q12-
- Overview, refer to OVERVIEW - GLOW PLUG, CAMSHAFT POSITION SENSOR AND ENGINE SPEED SENSOR .
- Fuel Temperature Sensor -G81-
- Exhaust Gas Temperature Sensor 1 -G235-
- Component location
- Removing and installing, refer to appropriate service information. .
- Fuel Metering Valve -N290-
- Component location, Refer to appropriate service information.
- Charge Air Pressure Sensor 2 -G447-
- Component location. Refer to COMPONENT LOCATIONS ON THE TURBOCHARGER
- Turbocharger Control Module 1 -J724-
- At turbocharger
- Removing and installing, refer to Turbocharger Control Module 1 -J724-, REMOVING AND INSTALLING, VEHICLES WITH A TURBOCHARGER [For engine(s) CPNB] .
- EGR Motor -V338-
- Removing and installing, refer to appropriate service information. .
- Glow Plug 6 -Q15-
- Overview, refer to OVERVIEW - GLOW PLUG, CAMSHAFT POSITION SENSOR AND ENGINE SPEED SENSOR .
- Cylinder 6 Fuel Injector -N84-
- Overview, refer to OVERVIEW - HIGH PRESSURE PUMP .
- Glow Plug 5 -Q14-
- Overview, refer to OVERVIEW - GLOW PLUG, CAMSHAFT POSITION SENSOR AND ENGINE SPEED SENSOR .
- Cylinder 5 Fuel Injector -N83-
- Overview, refer to OVERVIEW - HIGH PRESSURE PUMP .
- Heated Oxygen Sensor -G39- connector
- Fuel Pressure Sensor -G247-
- Component location, Refer to Removing [Go To Graphic]
- Removing and installing, refer to Fuel Pressure Sensor -G247-, REMOVING AND INSTALLING .
- Cylinder 4 Fuel Injector -N33-
- Overview, refer to OVERVIEW - HIGH PRESSURE PUMP .
- Glow Plug 4 -Q13-
- Overview, refer to OVERVIEW - GLOW PLUG, CAMSHAFT POSITION SENSOR AND ENGINE SPEED SENSOR .
- Engine Coolant Temperature Sensor -G62-
- Removing and installing, refer to Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING [For engine(s) CPNB] .
- EGR Temperature Sensor -G98-
- Removing and installing, refer to appropriate service information. .
- EGR Cooler Switch-Over Valve -N345-
- Wastegate Bypass Regulator Valve -N75- connector
- Connector for the Cylinder Head Coolant Valve -N489-
- Wastegate Bypass Regulator Valve -N75-
- Cylinder Head Coolant Valve -N489-
- Restrictor in the Fuel Return Line
- Checking, refer to FUEL RETURN LINE RESTRICTOR, CHECKING .