Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Map Controlled Engine Cooling Thermostat -F265- is integrated into the oil filter housing and cannot be replaced separately.
The seals on the oil filter housing are only useable once and not available as a replacement part. They must be replaced after removing the oil filter housing.
-- Oil filter housing, removing and installing. Refer to OIL FILTER HOUSING, REMOVING AND INSTALLING .