Reducing Agent Tank, Removing And Installing: Installing
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- Tightening specifications, refer to OVERVIEW - REDUCING AGENT TANK .
-- Make sure the lines are clipped to the tank.
-- Adapting adaptation value after draining reducing agent or replacing components, refer to SELECTIVE CATALYTIC REDUCTION- ADAPTATION VALUE, RESETTING .