Selective Catalytic Reduction- Adaptation Value, Resetting
WARNING: This page is about a different car, the 2016 Audi Q5, 2015 Audi Q5, and 2014 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
The adaptation value in the Engine Control Module (ECM) must be adapted with the Vehicle Diagnostic Tester when the reducing agent is drained or one of the components listed below is replaced.
- Tank
- Reducing agent pump
- Reducing agent Injector
- Reducing agent line
- Engine Control Module
-- Perform the adaptation using the Vehicle Diagnostic Tester, Guided Functions .