Low Temperature Circuit Coolant Pump -V468-, REMOVING AND INSTALLING, HYBRID VEHICLES: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi Q5, 2016 Audi Q5, 2015 Audi Q5, 2014 Audi Q5, and 2013 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Secure all hose connections with hose clamps of the same type as those equipped by the factory .
-- Install the right front wheel housing liner, refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
NOTE:
Do not reuse used coolant.
-- Fill the coolant, refer to Filling - Hybrid Vehicles.
Tightening specifications