Gearshift Mechanism, Checking: Notes

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

There is a risk of injury and accident from accidentally engaging a gear when the engine is running.

Before performing any work with the engine running, shift the transmission into "P" and press the parking brake button to lock the electro-mechanical parking brake.
Pay attention to the safety precautions when driving, refer to SAFETY PRECAUTIONS .
All tests must be performed. If the specified values are not reached, perform "Guided Fault Finding " with the Vehicle Diagnostic Tester.

Overview:

1. Selector Mechanism Function Test
2. Check Ignition Key Withdrawal Lock - Vehicles with an Ignition Key Lock
3. Check the Closing Locks - Vehicles without an Ignition Key Lock
4. Check Locking Button in the Selector Lever Handle