Overview - Seat Bench/Single Seat
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bench seatNOTE:
The wire frame of the bench seat must be checked after every disassembly of the bench seat and be readjusted in the case of deformation.
- One piece
- Removing and installing. Refer to SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .
- Check and readjust the wire frame FLOOR PANEL FOR BENCH SEAT MOUNTING GROMMETS AND WIRE FRAME, CHECKING AND ALIGNING
- Cover
- for LATCH
- Equipment levels
- Quantity: 4
- Clipped to the LATCH child seat anchorage brackets that are welded to the floor
- Mounting GrommetNOTE:
Replace the mounting grommets each time the bench seat is removed.
- Quantity: 2
- for securing bench seat
- Clipped into the vehicle floor
- Removing and installing. Refer to Installing - "Remove mounting grommets -2- from the body opening and throw away" (See Figure).
- Vehicle FloorNOTE:
The floor panel into which the mounting grommets are inserted must be checked after every disassembly of the bench seat and be readjusted in the case of deformation.
- Check and readjust the floor panel. Refer to FLOOR PANEL FOR BENCH SEAT MOUNTING GROMMETS AND WIRE FRAME, CHECKING AND ALIGNING .