LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Seat Frames (Sedan)) >> 72 Seat Frames >> Front Seats >> Lumbar Support Adjustment Switch, Removing And Installing >> Lumbar Support Adjustment Switch, Removing And Installing, RS Bucket Seat >> Removing

Lumbar Support Adjustment Switch, Removing And Installing, RS Bucket Seat: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Lumbar Support Adjustment Switch Bolts
GWWA72-10111Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, RS BUCKET SEAT .

-- Secure the seat on the Engine/Transmission Holder - Seat Repair FixtureVAS6136. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Remove side trim on sill side. Refer to SIDE TRIM, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

-- Remove lumbar support adjustment switch -1-.

scientia non olet · About LEMON Manuals