Trim, removing: Notes
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2009 Audi S4, 2009 Audi A4, 2008 Audi S4, 2008 Audi RS 4, and 2008 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
1 - Right A-pillar trim
- Remove A-pillar trim.
- Remove door seal in A-pillar area.
- Bore out side hollow rivet heads A-pillar trim, removing (Qty. 3), drive rivet shafts out and remove trim.
2 - Roof frame trim
- Remove roof frame trim.
- Remove left and right A-pillar trim.
3 - Nut
- 6.5 Nm
4 - Pop rivet
5 - Retaining clamp
6 - Left A-pillar trim
- Removal is same as right trim.
7 - Nut
- 6.5 Nm
8 - Retaining clamp
- Movable
9 - Retaining clamp
- Fixed
10 - Retaining clamp
- Movable