Fastener Tightening Specifications: Notes
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, and 2010 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Fastener Size | Nm |
|---|---|---|
| Balance shaft belt pulley side | - | 60 |
| Balance shaft chain sprocket 1 | - | 15 + 90° |
| Balance shaft transmission side | - | 60 |
| Camshaft adjuster for intake camshaft 1 | - | 80 + 90° |
| Camshaft adjustment solenoid valve | - | 5 |
| Camshaft chain sprocket for the exhaust camshaft 1 | - | 80 + 90° |
| Chain tensioner 2 | - | 9 |
| Chain tensioner with glide track 1, 3 | - | 10 + 45° |
| Drive chain sprocket bearing plate 1 | - | 8 + 45° |
| Drive sprocket for oil pump 1 | - | 30 + 90° |
| Gear carrier | - | 13 |
| Guide rail1 | - | 10 + 90° |
| Left camshaft timing chain tensioner | - | 9 |
| Pivot pin for drive sprocket (left) 1 | - | 5 + 60° |
| Pivot pin for drive sprocket (right) 1 | - | 30 + 60° |
| Right camshaft timing chain tensioner | - | 9 |
|
||