LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1240 (Cooling System [CATA]) >> 19 Cooling System >> Coolant System >> Coolant Pipes, Removing And Installing >> Rear Coolant Pipe, Removing And Installing >> Installing

Rear Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note The Following: 

Tightening specification. Refer to OVERVIEW - COOLANT PIPES .

NOTE:

Replace the O-ring.

The hose connections as well as the air guide pipes and hoses must be free of oil and grease before installing.

Secure all hose connections using hose clamps appropriate for the model type.

-- Fill with coolant. Refer to COOLANT, FILLING .

scientia non olet · About LEMON Manuals