Fastener Tightening Specifications: Notes

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Components	Bolt Size	Nm
Camshaft Adjustment Valve		2.4
Knock Sensor		20
Fuel Pressure Sensor		25
Camshaft Position Sensor		10
Intake Flap Motor		9
Variable Intake Manifold Runner Motor		9
Intake Manifold Runner Position Sensor		2.5
Throttle valve control module		9
Crankcase housing ventilation pressure regulator valve		9
Bracket for vacuum hose		9
Intake tube with crankcase housing ventilation connection		9
High-pressure line		25
Pressure relief valve for high pressure line		25
Fuel rail		9
Intake manifold lower section		10
Intake manifold runner control vacuum actuator		2.5
Intake Manifold Runner Position Sensor 2		2.5
Threaded support		40
High pressure fuel line		9
Bracket for the flange and fuel rail
		0.3¹
		9¹
High pressure pump		9
Low Fuel Pressure Sensor		10
High-pressure line to high pressure pump		25
Fuel supply line to high pressure pump		25
¹ For bolt tightening clarification, refer to INTAKE MANIFOLD, LOWER SECTION, WITH FUEL RAIL ASSEMBLY OVERVIEW and see items -23 and 24- ² For bolt tightening clarification, refer to and see items -- ³ For bolt tightening clarification, refer to and see items --