DIESEL FUEL INJECTION (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)
- 23 Diesel Fuel Injection
- Fuel Injection System
- Component Location Overview - Injection System
- Notes
- Component Location Overview - Engine Compartment
- Component Location Overview - Engine From Front
- Component Location Overview - Engine From Rear, Vehicles Without An SCR System
- Component Location Overview - Engine From Rear, Vehicles With An SCR System
- Accelerator Pedal Position Sensor G79 / Accelerator Pedal Position Sensor 2G185 Component Location
- Brake Lamp Switch -F- / Brake Pedal Switch -F63- Component Location
- Component Location - Clutch Position Sensor G476
- Connectors (Only For Engine Codes CRFA And CRFC)
- Connector (Only For Engine Codes CRFA, CRFC, CRUA, DEJA And DEJB)
- Engine Codes CRFA, And CRFC
- Engine Codes CRUA, DEJA And DEJB
- EGR Cooler Switch-Over VALVEN345 1 (Engine Codes CRFA And CRFC Only)
- Connector For Oxygen Sensor After Catalytic Converter G130 Component Location
- Transmission Neutral Position Sensor G701 Component Location
- Exhaust Door Control Unit J883 Component Location (Not Installed With Engine Codes CRFA And CRFC)
- Cylinder Head Coolant VALVEN489 Component Location
- Schematic Overview - Fuel System
- Fuel System, Filling/Bleeding
- Fuel System Leak Test
- Component Location Overview - Injection System
- Vacuum System
- Air Filter
- Intake Manifold
- Fuel Injectors/High Pressure Reservoir (Fuel Rail)
- Overview - Fuel Injectors
- Overview - High Pressure Reservoir (Fuel Rail)
- Fuel Injectors, Checking
- Fuel Injectors, Adapting Correction Values
- Open Fuel Injectors, Checking
- Fuel Injectors, Checking Return Quantity With Engine Running
- Fuel Injectors, Checking Return Quantity At Starting Speed
- Fuel Injectors, Removing And Installing
- High Pressure Lines, Removing And Installing
- High Pressure Reservoir (Fuel Rail), Removing And Installing
- High Pressure Pump
- Sensors
- Heated Oxygen Sensor
- Engine Control Module
- Special Tools
- Fuel Injection System