Fuel Injectors, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Cleaning Set:VAS6811
- Puller - Unit Injector:T10055
- O-Ring Assembly Sleeve:T10377
- Puller - Injector: T10415
- Puller:T10537 (for engine codes CXXB, DBKA and DDYA)
- Backrest Panel Tool: 3370 (for engine codes CXXB, DBKA and DDYA)
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- O-ring - Fuel return line
- Bolt - Tension clamp
- Copper washer - Fuel injector
- O-ring - Fuel injector