LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Controls, Housing - Manual Transmission Internal Components 0B2 AWD (Coupe)) >> 34 Controls, Housing >> Disassembly And Assembly >> Transmission Cover >> Installing The Needle Bearing All The Way Into The Transmission Cover

Installing The Needle Bearing All The Way Into The Transmission Cover

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Remove peening indentations, if present.

Install needle bearings with the lettering on the bearing (the side with thicker metal) facing towards VW 204 B.

Fig 1: Installing Needle Bearings With Lettering On Bearin Facing Towards
GWWA34-10614Courtesy of AUDI OF AMERICA, LLC

-- Secure needle bearing after pressing into transmission cover with peen SECURING THE NEEDLE BEARING INSIDE THE TRANSMISSION COVER BY PEENING IT .

scientia non olet · About LEMON Manuals