Securing The Needle Bearing Inside The Transmission Cover By PEENING It
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
-- To peen, use blunt center punch with ball-shaped end (ball diameter 5 mm).
-- Needle bearing is secured with 4 peening marks on circumference every 90° -arrows-.
Observe position and diameter of peening points:
- Dimension -a- = 2 mm
- Dimension -b- = 3 mm