Transmission Support With Transmission Mount
WARNING: This page is about a different car, the 2010 Audi A4 and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove the tunnel crossmember. Refer to TUNNEL CROSSMEMBER .
-- Remove the bolts -arrows- and the transmission support with the transmission mount from the transmission.
Installing
Install in reverse order, paying attention to the following:
- Tightening specifications, refer to TUNNEL CROSSMEMBER, TRANSMISSION MOUNT AND TRANSMISSION SUPPORT OVERVIEW .
-- Install tunnel crossmember. Refer to TUNNEL CROSSMEMBER .