LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> S4 Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Controls, Housing - Automatic Transmission 0B6 AWD (AVANT)) >> 37 Controls, Housing >> Description And Operation >> Tunnel CROSSMEMBER, Transmission Mount And Transmission Support Overview

Tunnel CROSSMEMBER, Transmission Mount And Transmission Support Overview

WARNING: This page is about a different car, the 2010 Audi A4 and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Tunnel Crossmember, Transmission Mount And Transmission Support
GWWA37-10744Courtesy of AUDI OF AMERICA, LLC
  1. Nut
    • 20 Nm
    • Only remove if the transmission mount must be separated from the transmission support
  2. Bolt
    • 70 Nm
  3. Bolt
    • 40 Nm
  4. Nut
    • 20 Nm
  5. Transmission Support
  6. Transmission Mount
  7. Lower Stop
    • For the transmission mount
  8. Bolt
    • 20 Nm plus an addition 90° turn
    • Only remove if the transmission mount must be separated from the transmission support
  9. Tunnel Crossmember