Shift Mechanism, Servicing, Assembly Overview: Notes
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Before working with engine running, place selector lever in "P" position and engage parking brake.
Overview:
- Selector Lever Cable
- Locking Plate
- Assembly instructions SELECTOR LEVER CABLE, ASSEMBLY OVERVIEW
- Selector Lever Cable Bolts
- Assembly instructions SELECTOR LEVER CABLE, ASSEMBLY OVERVIEW
- Clamp
- For securing the selector lever handle to the selector lever
- Removing and Installing. Refer to SELECTOR LEVER KNOB, SERVICING, ASSEMBLY OVERVIEW .
- Selector Lever Boot
- Separate from the selector lever handle SELECTOR LEVER KNOB, SERVICING, ASSEMBLY OVERVIEW
- Trim Ring
- Removing and Installing. Refer to SELECTOR LEVER BOOT, REMOVING FROM SELECTOR LEVER HANDLE .
- Selector Lever Handle
- Selector Lever Transmission Range Position Display Unit -Y26-
- Removing and Installing. Refer to Selector Lever Transmission Range Position Display Unit -Y26-, REMOVING AND INSTALLING .
- Screw
- 1 Nm
- quantity: 4
- Selector Lever Sensor System Control Module -J587- with Tiptronic Switch -F189-
- Removing and Installing. Refer to Selector Lever Sensor System Control Module -J587- WITH Tiptronic Switch -F189-, REMOVING AND INSTALLING .
- Shift Lock Solenoid -N110-
- Removing and Installing. Refer to Shift Lock Solenoid -N110-, REMOVING AND INSTALLING .
- SELECTOR MECHANISM, PERFORMING EMERGENCY RELEASE
- Selector Mechanism Function Unit
- Check function: SELECTOR MECHANISM, CHECKING
- SHIFT MECHANISM FUNCTION UNIT, REMOVING AND INSTALLING
- SHIFT MECHANISM FUNCTION UNIT, DISASSEMBLING AND ASSEMBLING - ASSEMBLY OVERVIEW
- with Transmission Park Selector Switch -F305- installed, Transmission Park Selector Switch -F305-, REMOVING AND INSTALLING
- Screw
- 6.5 Nm
- quantity: 4
- for securing the selector mechanism function unit to shift unit
- With additional threads on screw head for securing bracket to center console
- Screw
- 6.4 Nm
- quantity: 2
- for securing center bracket to lower selector mechanism cover
- Screw
- 10 Nm
- quantity: 4
- for securing selector mechanism shift unit to body
- Selector mechanism shift unit
- Centering Bracket
- Must not be reinstalled in damaged or removed, is only necessary for factory production