LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (3.6L - Exhaust System & Emission Controls - Engine Code: BHK) >> 26 Exhaust System, Emission Controls >> Muffler >> Pre-Catalytic Converters, Removing And Installing >> Installation

Pre-Catalytic Converters, Removing And Installing: Installation

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals

-- Align the transmission support, refer to TRANSMISSION SUPPORT AND BRACKET ASSEMBLY OVERVIEW .

-- Install exhaust system free of stress, refer to EXHAUST SYSTEM, INSTALLING .

-- On a vehicle with air suspension, deactivate vehicle lift mode, refer to VEHICLE LIFT MODE .

scientia non olet · About LEMON Manuals