LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (4.2L - Cooling System - Engine Code(S): Bar) >> 19 Cooling System >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Component Bolt Size Nm
ATF cooler   8
Brake system vacuum pump to body   9
Coolant pump   9
Drain plug for front coolant pipe   10
Drain plug for map controlled engine cooling thermostat   4
Fan rib
    53
    103
Front coolant pipe   8 + 90°1
Left coolant pipe   9
Map controlled engine cooling thermostat   9
Radiator
    5.52
    82
Right coolant pipe   9
Rear left coolant pipe   9
Rear right coolant pipe   9
Right coolant pipe   9