Dual Mass Flywheel, Overview
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For assembly work, secure the engine on the Engine and Transmission Holder, refer to ENGINE, SECURING ON ENGINE AND TRANSMISSION HOLDER .
- Dual Mass Flywheel
- Removing and Installing, refer to DUAL MASS FLYWHEEL, REMOVING AND INSTALLING .
- Bolt
- 60 Nm + 90° (1 /4 ) turn.
- Replace
- Crankshaft