Ribbed Belt TENSIONER, Removing And Installing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Removal

Fig 1: Identifying Bolts -1 And 2- To Ribbed Belt Tensioner

Courtesy of AUDI OF AMERICA, LLC

Proceed as follows:

-- Remove the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove bolts -1 and 2-.

-- Remove ribbed belt tensioner.

Installation

Tightening specification, refer to RIBBED BELT DRIVE OVERVIEW .

Install in reverse order of removal. Note the following:

-- Install the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .