Left Ribbed Belt Idler Roller

Removing

-- Remove the ribbed belt from the tensioning element. Refer to RIBBED BELT .

-- Tilt the toothed belt guard forward -arrows- and disengage the pins on the underside of the guard.

Fig 1: Identifying Toothed Belt Guard

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The toothed belt guard is shown with the intake manifold upper section removed.

-- Remove the bolts -arrows- and the ribbed belt idler roller.

Fig 2: Identifying Bolts -Arrows- And Ribbed Belt Idler Roller

Courtesy of AUDI OF AMERICA, LLC

Installing

Install in reverse order of removal. Note the following:

-- Install the ribbed belt. Refer to RIBBED BELT .