Clutch Mechanism Overview

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Before replacing the clutch master cylinder or clutch slave cylinder due to a suspected defect. Refer to INFORMATION REGARDING THE REMOVAL AND INSTALLATION OF THE CLUTCH MASTER OR SLAVE CYLINDER must first be observed and a CLUTCH MASTER CYLINDER AND CLUTCH SLAVE CYLINDER, FUNCTION TEST must be performed.

Fig 1: Clutch System Overview

Courtesy of AUDI OF AMERICA, LLC

I - PEDAL ASSEMBLY, MASTER CYLINDER ASSEMBLY OVERVIEW
OVER-CENTER SPRING

CLUTCH PEDAL

MOUNTING BRACKET

CLUTCH POSITION SENSOR

MASTER CYLINDER
II - HYDRAULICS ASSEMBLY OVERVIEW
HOSE/LINE ASSEMBLY OR PLASTIC LINE

CLUTCH SYSTEM, BLEEDING
III - Hydraulics, RHD, Assembly Overview