Coolant Fan And Coolant Fan 2
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Removing
-- Remove fan shroud. Refer to FAN SHROUD .
-- Disconnect electrical connector -1-.
-- Free up electrical wires.
-- Remove nuts -arrows- and remove coolant fan.
Installing
- Tightening specifications, refer to RADIATOR AND COOLANT FAN ASSEMBLY OVERVIEW .
Installation is in reverse order of removal, note the following:
-- Install fan shroud. Refer to FAN SHROUD .