Final Drive 0BC, 0BD Overview: Notes

Rear Final Drive 

Fig 1: Identifying Rear Final Drive Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

1. Subframe
   • Removing and installing, refer to SUBFRAME, REMOVING AND INSTALLING .
2. Bolt
   • 95 Nm
3. Bolt
   • 55 Nm
4. Bolt
   • 55 Nm
   • Depending on the date of manufacture for the balance weight mounting Balance Weight on the Rear Final Drive 
5. Heat Shield
6. Bolt
   • 20 Nm
7. Drive Axle
   • Removing and installing, refer to DRIVE AXLE, REMOVING AND INSTALLING
8. Rear Final Drive
   • Versions with balance weight BALANCE WEIGHT ON THE REAR FINAL DRIVE 
   • Removing and installing, refer to FINAL DRIVE 
9. Driveshaft
   • Removing and installing, refer to DRIVESHAFT, DRIVESHAFT CONNECTED ON TRANSMISSION SIDE  or DRIVESHAFT, DRIVESHAFT BOLTED ON TRANSMISSION SIDE .
   • Removing and installing on the rear final drive, refer to DRIVESHAFT, REMOVING FROM REAR FINAL DRIVE AND INSTALLING 
10. Crossmember